A filled spa with people in it is a serious load, and it needs a slab that will not crack, tilt or settle. Getting the base right is the difference between years of relaxation and an expensive problem.
We pour purpose-built concrete spa slabs across Newcastle, engineered for the weight of your particular spa and finished level and true so it sits perfectly.
Get a Free QuoteA full spa plus water plus people is a heavy, concentrated load. We build the slab to carry it.
A spa must sit perfectly level to work and to warranty. We screed and check the slab to suit.
Proper base prep and reinforcement stop the settling and tilting that ruins a spa install.
We set the slab and surrounds so overflow and splash water runs away, not back toward the house.
Spa slabs are not the place to cut corners. We confirm the size and weight of your spa, compact the base, place reinforcement and pour a slab at the thickness that load demands, finished level and ready for the electrician and installer.
We check the spa dimensions, filled weight and access, and agree the slab size and thickness.
Excavate, compact and grade the ground, then set the formwork square and level.
Place reinforcement and pour the slab, screeding it level and true.
Cure the slab properly so it is ready for your spa and installer to move in.
It depends on the filled weight of your spa, but spa slabs are commonly poured 100-150mm thick with steel reinforcement. We size the slab to your specific spa and ground conditions.
Yes, and precisely so. Most spa manufacturers require a level base for the warranty to stand, so we screed and check the slab carefully.
Absolutely. We build the slab to the manufacturer dimensions so it is cured and ready when your spa is delivered.
We set the slab so water drains away and can leave provision for conduit. Electrical connection is done by your licensed electrician once the slab is ready.
Send us the details of your spa and where it will go, and we will provide a free quote for a slab built to carry it.
Get a Free Quote